Product Description
Product Description
Rod end bearing DC7969C(5C) DC8334C DC8729A POSA PHSA POS PHS Industrial Bearing GB/T9161 standard Corrosion resistance, wear resistance, high quality
information:
The basic type of plain bearing is composed of inner and outer rings with spherical sliding spherical contact surface. The plain bearing is mainly composed of an inner ring with outer sphere and an outer ring with inner sphere, which can bear large load. According to its different types and structures, it can bear radial load, axial load or combined radial and axial load at the same time.
Self lubricating joint auxiliary bearing is used in water conservancy, professional machinery and other industries. Because the spherical sliding contact area of the joint bearing is large and the inclination angle is large, but also because most joint bearings adopt special process treatment methods, such as surface phosphating, galvanizing, chromium plating or outer sliding surface lining, pad inlay, spraying, etc. Therefore, it has large load capacity and impact resistance, and has the characteristics of corrosion resistance, wear resistance, self-aligning, good lubrication or self-lubrication without lubricating dirt pollution. Therefore, articulated bearings are widely used in swing motion, tilt motion and rotation motion with low speed.
Detailed Photos
Product Parameters
E series |
|||||||||||||||||||
|
/mm |
||||||||||||||||||
SI…E SI…ES
|
SA…E SA…ES
|
d |
|
|
|
||||||||||||||
D |
d1min |
B |
r1smin |
α ≈ |
d3 |
c1 max |
d2 max |
h |
l1 min |
l2 max |
h1 |
l3 min |
l4 max |
l5 max |
d4 max |
d5 max |
|||
SI5E |
SA5E |
5 |
14 |
7 |
6 |
0.3 |
13° |
M5 |
4.5 |
21 |
36 |
16 |
48 |
30 |
11 |
42 |
5.0 |
10 |
13 |
SI6E |
SA6E |
6 |
14 |
8 |
6 |
0.3 |
13° |
M6 |
4.5 |
21 |
36 |
16 |
48 |
30 |
11 |
42 |
5.0 |
11 |
13 |
SI8E |
SA8E |
8 |
16 |
10 |
8 |
0.3 |
15° |
M8 |
6.5 |
24 |
42 |
21 |
55 |
36 |
15 |
49 |
5.0 |
13 |
16 |
SI10E |
SA10E |
10 |
19 |
13 |
9 |
0.3 |
12° |
M10 |
7.5 |
29 |
48 |
26 |
63 |
43 |
15 |
58 |
5.5 |
16 |
19 |
SI12E |
SA12E |
12 |
22 |
15 |
10 |
0.3 |
10° |
M12 |
8.5 |
34 |
54 |
28 |
71 |
50 |
18 |
67 |
7.0 |
19 |
22 |
SI15ES |
SA15ES |
15 |
26 |
18 |
12 |
0.3 |
8° |
M14 |
10.5 |
40 |
63 |
34 |
83 |
61 |
21 |
81 |
8.0 |
22 |
26 |
SI17ES |
SA17ES |
17 |
30 |
20 |
14 |
0.3 |
10° |
M16 |
11.5 |
46 |
69 |
36 |
92 |
67 |
24 |
90 |
10.0 |
25 |
29 |
SI20ES |
SA20ES |
20 |
35 |
24 |
16 |
0.3 |
9° |
M20×1.5 |
13.5 |
53 |
78 |
43 |
105 |
77 |
30 |
104 |
10.0 |
28 |
34 |
SI25ES |
SA25ES |
25 |
42 |
29 |
20 |
0.6 |
7° |
M24×2.0 |
18.0 |
64 |
94 |
53 |
126 |
94 |
36 |
126 |
12.0 |
35 |
42 |
SI30ES |
SA30ES |
30 |
47 |
34 |
22 |
0.6 |
6° |
M30×2.0 |
20.0 |
73 |
110 |
65 |
147 |
110 |
45 |
147 |
15.0 |
42 |
50 |
SI35ES |
SA35ES |
35 |
55 |
39 |
25 |
0.6 |
6° |
M36×3.0 |
22.0 |
82 |
140 |
82 |
182 |
125 |
60 |
167 |
15.0 |
48 |
58 |
SI40ES |
SA40ES |
40 |
62 |
45 |
28 |
0.6 |
7° |
M39×3.0 |
24.0 |
92 |
150 |
86 |
198 |
142 |
65 |
180 |
18.0 |
52 |
65 |
SI45ES |
SA45ES |
45 |
68 |
50 |
32 |
0.6 |
7° |
M42×3.0 |
28.0 |
102 |
163 |
92 |
217 |
145 |
65 |
199 |
20.0 |
58 |
70 |
SI50ES |
SA50ES |
50 |
75 |
55 |
35 |
0.6 |
6° |
M45×3.0 |
31.0 |
112 |
185 |
104 |
246 |
160 |
68 |
221 |
20.0 |
62 |
75 |
SI60ES |
SA60ES |
60 |
90 |
66 |
44 |
1.0 |
6° |
M52×3.0 |
39.0 |
135 |
210 |
115 |
282 |
175 |
70 |
247 |
20.0 |
70 |
88 |
SI70ES |
SA70ES |
70 |
105 |
77 |
49 |
1.0 |
6° |
M56×4.0 |
43.0 |
160 |
235 |
125 |
318 |
200 |
80 |
283 |
20.0 |
80 |
98 |
SI80ES |
SA80ES |
80 |
120 |
88 |
55 |
1.0 |
6° |
M64×4.0 |
48.0 |
180 |
270 |
140 |
365 |
230 |
85 |
325 |
25.0 |
95 |
110 |
SA5E NHS5 NOS5 KR13 NUKR35X DC2222G
SA6E NHS6 NOS6 KR16 NUKR40X DC2776
SA8E NHS8 NOS8 KR19 NUKR47X DC3034
SA10E NHS10 NOS10 KR22 NUKR52X DC3175(3C)
SA12E NHS12 NOS12 KR26 NUKR62X DC4445A
SA15ES NHS14 NOS14 KR30 NUKR62XA DC4972(4C)
SA17ES NHS16 NOS16 KR32 PUKR62 DC5476A(4C)
SA20ES NHS18 NOS18 KR35 NUKR72X DC5476B(4C)
SA25ES NHS20 NOS20 KR40 NUKR80X DC5476C(4C)
SA30ES NHS22 NOS22 KR47 NUKR86KX DC5776A
SA35ES NHS25 NOS25 KR52 NUKR90X DC6334B
SA40ES NHS28 NOS28 KR62 NUKR100X DC7221(5C)
SA45ES NHS30 NOS30 KR72 NUKR120X DC72221B
SA50ES KR80 NUKR140X DC7221B(5C)
SA60ES KR85 NUKR150X DC7969C(5C)
SA70ES KR90 NUKR160X DC8334C
SA80ES NUKR170X DC8729A
NUKR180X DC10323A(3C)
DC12334C
DC12388C(11C)
Packaging & Shipping
Company Profile
Our Advantages
Our Advantages:
1. World-Class Bearing: We provide our customers with all types of indigenous bearing with world-class quality.
2. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry.
3. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.
4. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the customer’s requirements and needs.
5. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain.
SAMPLES
1. Samples quantity: 1-10 PCS are available.
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to
pay samples charge and shipping cost.
3. It’s better to start your order with Trade Assurance to get full protection for your samples order.
CUSTOMIZED
The customized LOGO or drawing is acceptable for us.
MOQ
1. MOQ: 10 PCS standard bearings.
2. MOQ: 1000 PCS customized your brand bearings.
OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield.
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don’t disclose any info.
FAQ
1.What is the minimum order quantity for this product?
Can be negotiated, we will try our best to meet customer needs.Our company is mainly based on wholesale sales,
most customers’orders are more than 1 ton.
2.What is your latest delivery time?
Most orders will be shipped within 7-15 days of payment being received.
3.Does your company have quality assurance?
Yes, for 1 years.
4.What is the competitiveness of your company’s products compared to other companies?
High precision, high speed, low noise.
5.What are the advantages of your company’s services compared to other companies?
Answer questions online 24 hours a day, reply in a timely manner, and provide various documents required by
customers for customs clearance or sales. 100% after-sales service.
6.Which payment method does your company support?
Do our best to meet customer needs, negotiable.
7.How to contact us quickly?
Please send us an inquiry or message and leave your other contact information, such as phone number,
account or account, we will contact you as soon as possible and provide the detailed information you need.
Please feel free to contact us, if you have any other question
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Bearing Structure: | Rod End Bearing |
---|---|
Type of Lubricant: | Oil-Lubricated Bearing |
Lubricant & Load: | Hydrodynamic Bearing |
Bushing Material: | Self-Lubrication |
Bearing Direction: | Trust and Radial |
Lubricating Way: | Intermittent Fuel Control |
Samples: |
US$ 10/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
Selecting Size and Thread Type for Rod End Bearings
When choosing the appropriate size and thread type for a rod end bearing, several considerations are important:
1. Load Requirements: Determine the expected loads the rod end bearing will need to support. Choose a size and material that can handle these loads without deformation or premature wear.
2. Thread Direction: Consider whether you need left-hand or right-hand threads. This depends on the specific application and the direction in which the rod end bearing will be subject to forces or adjustments.
3. Thread Size and Pitch: Select the thread size and pitch that match the mating components or the mounting point. Ensure compatibility to avoid threading issues during installation.
4. Environmental Conditions: Consider the operating environment. If the rod end bearing will be exposed to moisture, chemicals, or extreme temperatures, choose a material and thread type that can withstand these conditions without corrosion or degradation.
5. Lubrication: Evaluate the lubrication method. Some rod end bearings have built-in lubrication features, while others require external lubrication. Ensure that the selected bearing and thread type align with your lubrication approach.
6. Misalignment Requirements: If the application involves misalignment, select a rod end bearing with appropriate articulation capabilities, which may require specific size and thread choices to allow for the necessary movement.
7. Compatibility: Ensure that the rod end bearing’s size and thread type are compatible with the connecting components, such as linkages, control arms, or push/pull rods.
8. Adjustability: In applications where adjustability is required, consider rod end bearings with male and female threads to allow for fine-tuning and alignment.
9. Regulations and Standards: Check if there are industry or safety regulations that dictate specific size or thread requirements for your application.
10. Maintenance: Consider ease of maintenance. Some rod end bearings have features that facilitate inspection and lubrication, which can be essential for extending their lifespan.
11. Cost and Availability: Finally, factor in the cost and availability of the chosen rod end bearing size and thread type. Ensure it fits within your budget and can be readily sourced when needed.
By carefully evaluating these considerations, you can select the most suitable rod end bearing size and thread type for your specific application, ensuring optimal performance and longevity.
Contribution of Rod End Bearings to Smooth Movement in Automotive Control Systems
Rod end bearings play a crucial role in ensuring the smooth movement of control systems in various automotive applications. Here’s how they contribute:
1. Steering Systems:
Rod end bearings are used in steering linkages and tie rod ends. They provide the necessary articulation and pivoting to allow the front wheels to turn smoothly, enabling precise steering control. The low friction and high load-bearing capacity of rod end bearings contribute to responsive and accurate steering in both manual and power steering systems.
2. Suspension Systems:
In suspension systems, rod end bearings are used in components like control arms and stabilizer links. They allow for controlled movement of the suspension, ensuring that the vehicle’s wheels maintain optimal contact with the road surface. This contributes to a smoother and more comfortable ride, improved handling, and better traction, especially when driving over uneven or bumpy terrain.
3. Throttle and Accelerator Linkages:
Rod end bearings are employed in throttle and accelerator linkages, where they assist in transmitting pedal inputs to the engine’s throttle body. The smooth articulation provided by rod end bearings ensures that drivers can easily modulate engine power, contributing to smooth acceleration and deceleration.
4. Gear Shift Linkages:
In manual transmissions, rod end bearings are used in gear shift linkages. They enable precise and smooth gear changes by allowing for the controlled movement of the shift lever. This ensures that gears engage smoothly, reducing drivetrain shock and vibration.
5. Convertible Roof Mechanisms:
In convertible cars, rod end bearings are used in the mechanisms that operate the folding and unfolding of the convertible roof. The smooth articulation of rod end bearings contributes to the seamless transition between open and closed roof positions, enhancing the overall driving experience.
Overall, rod end bearings are integral components in automotive control systems, ensuring the smooth and precise operation of various critical functions, including steering, suspension, throttle control, gear shifting, and convertible roof movement.
Design Principles and Functions of Rod End Bearings
Rod end bearings, also known as heim joints or rose joints, are essential components in various mechanical applications, where articulation and precise control of movement are required. These bearings are designed with specific principles and functions in mind:
Design Principles:
Rod end bearings consist of a spherical plain bearing, also known as a spherical plain bushing, within a housing. The design principles are as follows:
- Spherical Plain Bearing: The heart of a rod end bearing is a spherical plain bearing. This bearing allows the inner ring to tilt and rotate in multiple directions. It consists of an inner and outer ring with a sliding layer of material in between, often made from self-lubricating materials.
- Housing: The spherical plain bearing is housed within a protective casing, typically made of metal or other durable materials. The housing provides structural support and retains the bearing components.
- Threaded Shank: The outer part of the housing is often shaped as a threaded shank, allowing for easy attachment to various mechanical components, such as linkages or control arms.
- Lubrication Fittings: Many rod end bearings have provisions for lubrication fittings to ensure smooth articulation and reduce friction.
Functions:
Rod end bearings serve several crucial functions in mechanical systems:
- Articulation: Rod end bearings provide articulation, enabling components to pivot, swivel, and move in multiple directions. This function is vital in applications requiring flexibility and control over movement.
- Angular Misalignment Compensation: They can compensate for both static and dynamic angular misalignment. This is particularly useful in situations where components may not align perfectly due to varying factors like vibration or assembly tolerances.
- Load Transmission: Rod end bearings can transmit static and dynamic loads, making them suitable for applications involving force or load transfer. They are used in machinery and equipment where precise control of loads is essential.
- Precision Movement: These bearings provide precise control and movement, making them suitable for applications where accurate positioning of mechanical components is critical. This includes industries like aerospace and robotics.
- Corrosion Resistance: Many rod end bearings are designed with corrosion-resistant materials or coatings, making them suitable for use in harsh environments, such as marine and industrial settings.
- Durability: Rod end bearings are engineered for durability, allowing them to withstand challenging conditions and heavy-duty use. This ensures their reliability and longevity in demanding applications.
- Versatility: Rod end bearings are versatile components used across various industries, including automotive, aerospace, industrial machinery, and marine applications. Their adaptability and reliability make them valuable to engineers and designers.
These design principles and functions of rod end bearings make them indispensable in a wide range of mechanical systems where articulation, load-bearing capacity, and precise control are required.
editor by CX 2024-05-09
China OEM Rod End Bearing DC2222g DC2776 DC3034 DC3175 (3C) Posa Phsa POS Phs Industrial Bearing GB/T9161 Standard Corrosion Resistance, Wear Resistance, High Quality bearing example
Product Description
Product Description
Rod end bearing DC2222G DC2776 DC3034 DC3175(3C) POSA PHSA POS PHS Industrial Bearing GB/T9161 standard Corrosion resistance, wear resistance, high quality
information:
The basic type of plain bearing is composed of inner and outer rings with spherical sliding spherical contact surface. The plain bearing is mainly composed of an inner ring with outer sphere and an outer ring with inner sphere, which can bear large load. According to its different types and structures, it can bear radial load, axial load or combined radial and axial load at the same time.
Self lubricating joint auxiliary bearing is used in water conservancy, professional machinery and other industries. Because the spherical sliding contact area of the joint bearing is large and the inclination angle is large, but also because most joint bearings adopt special process treatment methods, such as surface phosphating, galvanizing, chromium plating or outer sliding surface lining, pad inlay, spraying, etc. Therefore, it has large load capacity and impact resistance, and has the characteristics of corrosion resistance, wear resistance, self-aligning, good lubrication or self-lubrication without lubricating dirt pollution. Therefore, articulated bearings are widely used in swing motion, tilt motion and rotation motion with low speed.
Detailed Photos
Product Parameters
E series |
|||||||||||||||||||
|
/mm |
||||||||||||||||||
SI…E SI…ES
|
SA…E SA…ES
|
d |
|
|
|
||||||||||||||
D |
d1min |
B |
r1smin |
α ≈ |
d3 |
c1 max |
d2 max |
h |
l1 min |
l2 max |
h1 |
l3 min |
l4 max |
l5 max |
d4 max |
d5 max |
|||
SI5E |
SA5E |
5 |
14 |
7 |
6 |
0.3 |
13° |
M5 |
4.5 |
21 |
36 |
16 |
48 |
30 |
11 |
42 |
5.0 |
10 |
13 |
SI6E |
SA6E |
6 |
14 |
8 |
6 |
0.3 |
13° |
M6 |
4.5 |
21 |
36 |
16 |
48 |
30 |
11 |
42 |
5.0 |
11 |
13 |
SI8E |
SA8E |
8 |
16 |
10 |
8 |
0.3 |
15° |
M8 |
6.5 |
24 |
42 |
21 |
55 |
36 |
15 |
49 |
5.0 |
13 |
16 |
SI10E |
SA10E |
10 |
19 |
13 |
9 |
0.3 |
12° |
M10 |
7.5 |
29 |
48 |
26 |
63 |
43 |
15 |
58 |
5.5 |
16 |
19 |
SI12E |
SA12E |
12 |
22 |
15 |
10 |
0.3 |
10° |
M12 |
8.5 |
34 |
54 |
28 |
71 |
50 |
18 |
67 |
7.0 |
19 |
22 |
SI15ES |
SA15ES |
15 |
26 |
18 |
12 |
0.3 |
8° |
M14 |
10.5 |
40 |
63 |
34 |
83 |
61 |
21 |
81 |
8.0 |
22 |
26 |
SI17ES |
SA17ES |
17 |
30 |
20 |
14 |
0.3 |
10° |
M16 |
11.5 |
46 |
69 |
36 |
92 |
67 |
24 |
90 |
10.0 |
25 |
29 |
SI20ES |
SA20ES |
20 |
35 |
24 |
16 |
0.3 |
9° |
M20×1.5 |
13.5 |
53 |
78 |
43 |
105 |
77 |
30 |
104 |
10.0 |
28 |
34 |
SI25ES |
SA25ES |
25 |
42 |
29 |
20 |
0.6 |
7° |
M24×2.0 |
18.0 |
64 |
94 |
53 |
126 |
94 |
36 |
126 |
12.0 |
35 |
42 |
SI30ES |
SA30ES |
30 |
47 |
34 |
22 |
0.6 |
6° |
M30×2.0 |
20.0 |
73 |
110 |
65 |
147 |
110 |
45 |
147 |
15.0 |
42 |
50 |
SI35ES |
SA35ES |
35 |
55 |
39 |
25 |
0.6 |
6° |
M36×3.0 |
22.0 |
82 |
140 |
82 |
182 |
125 |
60 |
167 |
15.0 |
48 |
58 |
SI40ES |
SA40ES |
40 |
62 |
45 |
28 |
0.6 |
7° |
M39×3.0 |
24.0 |
92 |
150 |
86 |
198 |
142 |
65 |
180 |
18.0 |
52 |
65 |
SI45ES |
SA45ES |
45 |
68 |
50 |
32 |
0.6 |
7° |
M42×3.0 |
28.0 |
102 |
163 |
92 |
217 |
145 |
65 |
199 |
20.0 |
58 |
70 |
SI50ES |
SA50ES |
50 |
75 |
55 |
35 |
0.6 |
6° |
M45×3.0 |
31.0 |
112 |
185 |
104 |
246 |
160 |
68 |
221 |
20.0 |
62 |
75 |
SI60ES |
SA60ES |
60 |
90 |
66 |
44 |
1.0 |
6° |
M52×3.0 |
39.0 |
135 |
210 |
115 |
282 |
175 |
70 |
247 |
20.0 |
70 |
88 |
SI70ES |
SA70ES |
70 |
105 |
77 |
49 |
1.0 |
6° |
M56×4.0 |
43.0 |
160 |
235 |
125 |
318 |
200 |
80 |
283 |
20.0 |
80 |
98 |
SI80ES |
SA80ES |
80 |
120 |
88 |
55 |
1.0 |
6° |
M64×4.0 |
48.0 |
180 |
270 |
140 |
365 |
230 |
85 |
325 |
25.0 |
95 |
110 |
SA5E NHS5 NOS5 KR13 NUKR35X DC2222G
SA6E NHS6 NOS6 KR16 NUKR40X DC2776
SA8E NHS8 NOS8 KR19 NUKR47X DC3034
SA10E NHS10 NOS10 KR22 NUKR52X DC3175(3C)
SA12E NHS12 NOS12 KR26 NUKR62X DC4445A
SA15ES NHS14 NOS14 KR30 NUKR62XA DC4972(4C)
SA17ES NHS16 NOS16 KR32 PUKR62 DC5476A(4C)
SA20ES NHS18 NOS18 KR35 NUKR72X DC5476B(4C)
SA25ES NHS20 NOS20 KR40 NUKR80X DC5476C(4C)
SA30ES NHS22 NOS22 KR47 NUKR86KX DC5776A
SA35ES NHS25 NOS25 KR52 NUKR90X DC6334B
SA40ES NHS28 NOS28 KR62 NUKR100X DC7221(5C)
SA45ES NHS30 NOS30 KR72 NUKR120X DC72221B
SA50ES KR80 NUKR140X DC7221B(5C)
SA60ES KR85 NUKR150X DC7969C(5C)
SA70ES KR90 NUKR160X DC8334C
SA80ES NUKR170X DC8729A
NUKR180X DC10323A(3C)
DC12334C
DC12388C(11C)
Packaging & Shipping
Company Profile
Our Advantages
Our Advantages:
1. World-Class Bearing: We provide our customers with all types of indigenous bearing with world-class quality.
2. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry.
3. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.
4. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the customer’s requirements and needs.
5. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain.
SAMPLES
1. Samples quantity: 1-10 PCS are available.
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to
pay samples charge and shipping cost.
3. It’s better to start your order with Trade Assurance to get full protection for your samples order.
CUSTOMIZED
The customized LOGO or drawing is acceptable for us.
MOQ
1. MOQ: 10 PCS standard bearings.
2. MOQ: 1000 PCS customized your brand bearings.
OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield.
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don’t disclose any info.
FAQ
1.What is the minimum order quantity for this product?
Can be negotiated, we will try our best to meet customer needs.Our company is mainly based on wholesale sales,
most customers’orders are more than 1 ton.
2.What is your latest delivery time?
Most orders will be shipped within 7-15 days of payment being received.
3.Does your company have quality assurance?
Yes, for 1 years.
4.What is the competitiveness of your company’s products compared to other companies?
High precision, high speed, low noise.
5.What are the advantages of your company’s services compared to other companies?
Answer questions online 24 hours a day, reply in a timely manner, and provide various documents required by
customers for customs clearance or sales. 100% after-sales service.
6.Which payment method does your company support?
Do our best to meet customer needs, negotiable.
7.How to contact us quickly?
Please send us an inquiry or message and leave your other contact information, such as phone number,
account or account, we will contact you as soon as possible and provide the detailed information you need.
Please feel free to contact us, if you have any other question
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Bearing Structure: | Rod End Bearing |
---|---|
Type of Lubricant: | Oil-Lubricated Bearing |
Lubricant & Load: | Hydrodynamic Bearing |
Bushing Material: | Self-Lubrication |
Bearing Direction: | Trust and Radial |
Lubricating Way: | Intermittent Fuel Control |
Samples: |
US$ 10/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
Improving Aircraft Functionality with Rod End Bearings
Rod end bearings play a critical role in enhancing the functionality and safety of various aircraft components, including control surfaces and landing gear. Here’s how:
Aircraft Control Surfaces:
Rod end bearings are commonly used in aircraft control systems to connect control surfaces, such as ailerons, elevators, and rudders, to control cables or rods. These bearings provide several key benefits:
- Articulation: Rod end bearings offer articulation capabilities, allowing control surfaces to move smoothly and precisely. This flexibility is essential for pilots to control the aircraft’s attitude, roll, pitch, and yaw.
- Misalignment Compensation: Aircraft structures experience various forces and vibrations during flight. Rod end bearings accommodate misalignment, ensuring that control systems remain effective even under dynamic conditions.
- Durability: Aircraft operate in challenging environments, and rod end bearings are designed to withstand extreme temperatures, vibrations, and mechanical stress. Their robust construction contributes to the longevity and reliability of control systems.
- Weight Savings: Aircraft design prioritizes weight reduction. Rod end bearings, typically made from lightweight materials like high-strength alloys or composites, help minimize the overall weight of the aircraft.
Landing Gear:
Rod end bearings are also utilized in landing gear systems, which are critical for safe takeoffs, landings, and ground operations. Their contributions include:
- Shock Absorption: Landing gear components, including rod end bearings, play a role in shock absorption during landing, reducing the impact forces transmitted to the aircraft’s structure and passengers.
- Articulation for Retraction and Extension: Rod end bearings enable the controlled movement of landing gear components, allowing for smooth retraction and extension. This is crucial for aerodynamic efficiency and safety.
- Structural Integrity: Rod end bearings help maintain the structural integrity of the landing gear assembly, ensuring that it can support the aircraft’s weight during ground operations.
Overall, rod end bearings in aircraft applications contribute to the precise control, safety, and structural reliability necessary for aviation. Their ability to handle articulation, misalignment, and challenging operating conditions makes them indispensable components in the aerospace industry.
Contribution of Rod End Bearings to Smooth Movement in Automotive Control Systems
Rod end bearings play a crucial role in ensuring the smooth movement of control systems in various automotive applications. Here’s how they contribute:
1. Steering Systems:
Rod end bearings are used in steering linkages and tie rod ends. They provide the necessary articulation and pivoting to allow the front wheels to turn smoothly, enabling precise steering control. The low friction and high load-bearing capacity of rod end bearings contribute to responsive and accurate steering in both manual and power steering systems.
2. Suspension Systems:
In suspension systems, rod end bearings are used in components like control arms and stabilizer links. They allow for controlled movement of the suspension, ensuring that the vehicle’s wheels maintain optimal contact with the road surface. This contributes to a smoother and more comfortable ride, improved handling, and better traction, especially when driving over uneven or bumpy terrain.
3. Throttle and Accelerator Linkages:
Rod end bearings are employed in throttle and accelerator linkages, where they assist in transmitting pedal inputs to the engine’s throttle body. The smooth articulation provided by rod end bearings ensures that drivers can easily modulate engine power, contributing to smooth acceleration and deceleration.
4. Gear Shift Linkages:
In manual transmissions, rod end bearings are used in gear shift linkages. They enable precise and smooth gear changes by allowing for the controlled movement of the shift lever. This ensures that gears engage smoothly, reducing drivetrain shock and vibration.
5. Convertible Roof Mechanisms:
In convertible cars, rod end bearings are used in the mechanisms that operate the folding and unfolding of the convertible roof. The smooth articulation of rod end bearings contributes to the seamless transition between open and closed roof positions, enhancing the overall driving experience.
Overall, rod end bearings are integral components in automotive control systems, ensuring the smooth and precise operation of various critical functions, including steering, suspension, throttle control, gear shifting, and convertible roof movement.
Rod End Bearings and Their Applications
Rod end bearings, also known as heim joints or rose joints, are mechanical components that consist of a spherical plain bearing with an inner ring and an outer ring. They are widely used in various mechanical applications due to their versatility and ability to provide articulation and movement in different directions. Here are some common applications of rod end bearings:
- Linkages: Rod end bearings are often used in linkages and control systems to transmit motion or force. They provide a connection point between two components, allowing for angular misalignment and smooth movement.
- Automotive Suspension: In automotive applications, rod end bearings are used in suspension systems to connect control arms, sway bars, and other components. They accommodate both rotational and pivoting movement.
- Aerospace: Rod end bearings play a crucial role in aircraft control systems, such as ailerons, flaps, and rudders. They ensure precise and responsive control of the aircraft’s movable surfaces.
- Construction Equipment: Heavy machinery, like cranes and excavators, utilizes rod end bearings in their control systems. These bearings provide flexibility and robustness in handling heavy loads and dynamic forces.
- Industrial Machinery: Various industrial machines, including conveyor systems, manufacturing equipment, and robotic arms, use rod end bearings to enable movement and articulation in mechanical linkages.
- Marine Applications: On boats and ships, rod end bearings are employed in steering and control systems. They withstand the harsh marine environment and provide reliable performance.
- Motion Control Systems: In applications like 3D printers, CNC machines, and robotic arms, rod end bearings are used to create flexible and precise motion control mechanisms.
- Hydraulic Cylinders: Rod end bearings are used in hydraulic cylinders to connect the piston rod to the external components. They allow for both linear motion and misalignment.
- Off-Road Vehicles: In off-road vehicles such as ATVs and dirt bikes, rod end bearings are used in suspension systems to absorb shocks and provide articulation over rough terrain.
Rod end bearings are valued for their ability to handle both static and dynamic loads, accommodate misalignment, and offer long-lasting performance in a wide range of applications.
editor by CX 2024-05-02
China OEM China Factory Ball Joint Bearing/ Spherical Plain Rod End Bearing Right/Left Thread (PHS/POS) bearing air
Product Description
Product Description
Product Parameters
Product application
FAQ
Q: Where to find Other bearings ?
Discover the Homepage—–> Products
Q: HOW TO CHOOSE A BEARING?
To properly choose a ball bearing, the important thing is to take into account several parameters:
1. Its application
Bearings are everywhere and therefore their applications are varied:
- – Agriculture
Do you prefer that we remind you ?
Immediate and free call/email back
2nd step: the outside diameter of the bearing
- A / Put your bearing on the grid as shown in the diagram.
- B / Mark the outline of the outer ring. For more convenience, use a pencil with a fine point.
- C / For ease of reading, do not hesitate to draw lines to the axes and then take the measurement.
3rd step: the thickness of the bearing
- A / In the same way as for the outer diameter and the bore, place your bearing on the edge on the grid as shown in the diagram.
- B / Draw the outer contour.
- C / For ease of reading, do not hesitate to draw lines to the axes and then take the measurement.
Conclusion :
You now have 3 measuring elements that will allow you to identify your bearing: the inside diameter (or bore), the outside diameter, and the thickness.
You can postpone these measurements in our bearing search tool on our website
You search, we find !
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Rolling Element: Single Row Structure: Rod End Material: Bearing Steel and Stainless Steel Load Direction: Thrust Spherical Plain Bearing Add Lubricant: Non Self-lubricating Outer Structure: Normal Samples: US$ 1/Piece
1 Piece(Min.Order)|
Request SampleCustomization: Available|
Customized Request
Recent Advancements in Rod End Bearing Technology
Advancements in rod end bearing technology have led to improved performance and durability. Here are some insights into recent developments:
1. Enhanced Materials: Manufacturers are using advanced materials, including high-strength alloys and composites, to create rod end bearings that offer increased load-carrying capacity and improved corrosion resistance. These materials contribute to longer bearing life and better performance in challenging environments.
2. Sealing and Shielding: Innovations in sealing and shielding technologies have improved the protection of rod end bearings from contaminants, moisture, and harsh environmental conditions. These advancements extend maintenance intervals and increase bearing reliability.
3. Lubrication: Self-lubricating rod end bearings have become more prevalent, reducing the need for frequent manual lubrication. These bearings are designed to provide consistent and long-lasting lubrication, resulting in reduced maintenance requirements and longer service life.
4. 3D Modeling and Simulation: Manufacturers are increasingly using 3D modeling and simulation techniques to optimize rod end bearing designs. This allows for the creation of bearings that can handle higher loads and offer superior wear resistance while maintaining compact dimensions.
5. Customization: The ability to customize rod end bearings to specific application requirements has improved. This includes options for different thread types, materials, and sizes. Customization ensures that the bearing can meet the exact needs of the equipment it serves.
6. Environmental Sustainability: Some recent advancements focus on producing rod end bearings in an environmentally sustainable manner. Manufacturers are exploring eco-friendly materials and production processes to reduce the environmental impact of bearing manufacturing.
7. IoT Integration: In industrial applications, the integration of Internet of Things (IoT) technology allows for real-time monitoring and predictive maintenance of rod end bearings. Sensors and data analytics help detect early signs of wear or damage, optimizing maintenance schedules and minimizing downtime.
These recent advancements in rod end bearing technology have collectively improved the reliability, durability, and performance of these components in various mechanical systems. As technology continues to evolve, rod end bearings are expected to play an even more critical role in enhancing the efficiency and longevity of machinery and equipment.
Enhancing Off-Road Vehicle Suspension with Rod End Bearings
Rod end bearings play a crucial role in enhancing the performance of suspension systems in off-road vehicles. Here’s how they contribute:
1. Articulation and Flexibility: Off-road vehicles encounter challenging terrains with varying obstacles. Rod end bearings provide articulation, allowing the suspension components to move independently. This flexibility ensures that each wheel can adapt to the terrain’s irregularities, improving traction and stability.
2. Load Distribution: In off-road conditions, vehicles often experience uneven loads due to rough terrain. Rod end bearings help distribute these loads across the suspension components, preventing excessive stress on any single part and reducing the risk of damage or failure.
3. Durability and Strength: Off-road environments are harsh, and suspension systems endure significant stress. Rod end bearings are designed for high-stress applications, providing the necessary strength and durability to withstand rugged conditions and maintain peak performance.
4. Precision Handling: Off-road vehicles require precise handling to navigate challenging terrain effectively. Rod end bearings maintain proper alignment, ensuring that the suspension geometry is consistent. This precision handling is vital for maintaining control over the vehicle, even on rough paths.
5. Reducing Vibration and Impact: Off-roading often involves encountering vibrations and impacts from uneven surfaces. Rod end bearings act as damping elements, reducing the transmission of these vibrations to the vehicle’s chassis. This helps improve ride comfort and minimizes the risk of structural damage.
6. Adjustable Suspension: Some off-road vehicles feature adjustable suspension systems that allow users to adapt to different terrains. Rod end bearings are integral to these systems, providing the flexibility needed to make real-time adjustments for optimal performance.
7. Maintenance and Serviceability: Off-road vehicles require regular maintenance, and the serviceability of suspension components is crucial. Rod end bearings are designed for ease of maintenance, making it simpler to inspect, lubricate, and replace them when necessary.
8. Versatility: Off-road vehicle suspension systems come in various designs. Rod end bearings are versatile components that can be integrated into different suspension types, including independent front suspensions, solid axle suspensions, and multi-link suspensions.
In summary, rod end bearings significantly enhance the performance of suspension systems in off-road vehicles by providing articulation, load distribution, durability, precision handling, vibration reduction, adjustability, and ease of maintenance. These features collectively ensure that off-road vehicles can tackle challenging terrains with confidence and reliability.
Design Principles and Functions of Rod End Bearings
Rod end bearings, also known as heim joints or rose joints, are essential components in various mechanical applications, where articulation and precise control of movement are required. These bearings are designed with specific principles and functions in mind:
Design Principles:
Rod end bearings consist of a spherical plain bearing, also known as a spherical plain bushing, within a housing. The design principles are as follows:
- Spherical Plain Bearing: The heart of a rod end bearing is a spherical plain bearing. This bearing allows the inner ring to tilt and rotate in multiple directions. It consists of an inner and outer ring with a sliding layer of material in between, often made from self-lubricating materials.
- Housing: The spherical plain bearing is housed within a protective casing, typically made of metal or other durable materials. The housing provides structural support and retains the bearing components.
- Threaded Shank: The outer part of the housing is often shaped as a threaded shank, allowing for easy attachment to various mechanical components, such as linkages or control arms.
- Lubrication Fittings: Many rod end bearings have provisions for lubrication fittings to ensure smooth articulation and reduce friction.
Functions:
Rod end bearings serve several crucial functions in mechanical systems:
- Articulation: Rod end bearings provide articulation, enabling components to pivot, swivel, and move in multiple directions. This function is vital in applications requiring flexibility and control over movement.
- Angular Misalignment Compensation: They can compensate for both static and dynamic angular misalignment. This is particularly useful in situations where components may not align perfectly due to varying factors like vibration or assembly tolerances.
- Load Transmission: Rod end bearings can transmit static and dynamic loads, making them suitable for applications involving force or load transfer. They are used in machinery and equipment where precise control of loads is essential.
- Precision Movement: These bearings provide precise control and movement, making them suitable for applications where accurate positioning of mechanical components is critical. This includes industries like aerospace and robotics.
- Corrosion Resistance: Many rod end bearings are designed with corrosion-resistant materials or coatings, making them suitable for use in harsh environments, such as marine and industrial settings.
- Durability: Rod end bearings are engineered for durability, allowing them to withstand challenging conditions and heavy-duty use. This ensures their reliability and longevity in demanding applications.
- Versatility: Rod end bearings are versatile components used across various industries, including automotive, aerospace, industrial machinery, and marine applications. Their adaptability and reliability make them valuable to engineers and designers.
These design principles and functions of rod end bearings make them indispensable in a wide range of mechanical systems where articulation, load-bearing capacity, and precise control are required.
editor by CX 2024-04-19
China OEM Customized Rubber Spherical Plain Ge16tk Ball Head Connecting Rod End Joint Bearing with Best Sales
Product Description
Key attributes of Customized Rubber Spherical Plain Ge16tk Ball Head Connecting Rod End Joint Bearing
Industry-specific attributes of Customized Rubber Spherical Plain Ge16tk Ball Head Connecting Rod End Joint Bearing
CNC Machining or Not | Cnc Machining |
Material Capabilities | Aluminum, Brass, Bronze, Copper, Hardened Metals, Precious Metals, Stainless steel, Steel Alloys |
Other attributes of Customized Rubber Spherical Plain Ge16tk Ball Head Connecting Rod End Joint Bearing
Place of Origin | ZheJiang , China |
Type | Broaching, DRILLING, Etching / Chemical Machining, Laser Machining, Milling, Other Machining Services, Turning, Wire EDM |
Model Number | OEM |
Brand Name | OEM |
Material | Metal |
Process | Cnc Machining+deburrs |
Surface treatment | Customer’s Request |
Equipment | CNC Machining Centres / Core moving machine / precision lathe / Automatic loading and unloading equipment |
Processing Type | Milling / Turning / Stamping |
OEM/ODM | OEM & ODM CNC Milling Turning Machining Service |
Drawing Format | 2D/(PDF/CAD)3D(IGES/STEP) |
Our Service | OEM ODM Customers’drawing |
Materials Avaliable | Stainless Steel / Aluminum / Metals / Copper / Plastic |
Best Seller of 304 Stainless Steel Polishing Finishing CNC Machining Bracket for Laser Cutting
About YiSheng
Business Type | Factory / Manufacturer |
Service | CNC Machining |
Turning and Milling | |
CNC Turning | |
OEM Parts | |
Material | 1). Aluminum: AL 6061-T6, 6063, 7075-T etc |
2). Stainless steel: 303,304,316L, 17-4(SUS630) etc | |
3). Steel: 4140, Q235, Q345B,20#,45# etc. | |
4). Titanium: TA1,TA2/GR2, TA4/GR5, TC4, TC18 etc | |
5). Brass: C36000 (HPb62), C37700 (HPb59), C26800 (H68), C22000(H90) etc | |
6). Copper, bronze, Magnesium alloy, Delrin, POM,Acrylic, PC, etc. | |
Finish | Sandblasting, Anodize color, Blackenning, Zinc/Nickl Plating, Polish, |
Power coating, Passivation PVD, Titanium Plating, Electrogalvanizing, | |
electroplating chromium, electrophoresis, QPQ(Quench-Polish-Quench), | |
Electro Polishing,Chrome Plating, Knurl, Laser etch Logo, etc. | |
Main Equipment | CNC Machining center, CNC Lathe, precision lathe |
Automatic loading and unloading equipment | |
Core moving machine | |
Drawing format | STEP,STP,GIS,CAD,PDF,DWG,DXF etc or samples. |
Tolerance | +/-0.001mm ~ +/-0.05mm |
Surface roughness | Ra 0.1~3.2 |
Test Equipment | Complete test lab with Projector, High-low temperature test chamber, Tensile tester Gauge, Salt fog test |
Inspection | Complete inspection lab with Micrometer, Optical Comparator, Caliper Vernier,CMM |
Depth Caliper Vernier, Universal Protractor, Clock Gauge | |
Capacity | CNC turning work range: φ0.5mm-φ150mm*300mm |
CNC center work range: 510mm*850mm*500mm | |
Core moving machine work range: φ32mm*85mm | |
Gerenal Tolerance: (+/-mm) |
CNC Machining: 0.005 |
Core moving: 0.005 | |
Turning: 0.005 | |
Grinding(Flatness/in2): 0.003 | |
ID/OD Grinding: 0.002 | |
Wire-Cutting: 0.002 |
RFQ of Customized Rubber Spherical Plain Ge16tk Ball Head Connecting Rod End Joint Bearing /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
After-sales Service: | Y |
---|---|
Warranty: | Negotiate |
Condition: | New |
Customization: |
Available
| Customized Request |
---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: |
|
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Recent Advancements in Rod End Bearing Technology
Advancements in rod end bearing technology have led to improved performance and durability. Here are some insights into recent developments:
1. Enhanced Materials: Manufacturers are using advanced materials, including high-strength alloys and composites, to create rod end bearings that offer increased load-carrying capacity and improved corrosion resistance. These materials contribute to longer bearing life and better performance in challenging environments.
2. Sealing and Shielding: Innovations in sealing and shielding technologies have improved the protection of rod end bearings from contaminants, moisture, and harsh environmental conditions. These advancements extend maintenance intervals and increase bearing reliability.
3. Lubrication: Self-lubricating rod end bearings have become more prevalent, reducing the need for frequent manual lubrication. These bearings are designed to provide consistent and long-lasting lubrication, resulting in reduced maintenance requirements and longer service life.
4. 3D Modeling and Simulation: Manufacturers are increasingly using 3D modeling and simulation techniques to optimize rod end bearing designs. This allows for the creation of bearings that can handle higher loads and offer superior wear resistance while maintaining compact dimensions.
5. Customization: The ability to customize rod end bearings to specific application requirements has improved. This includes options for different thread types, materials, and sizes. Customization ensures that the bearing can meet the exact needs of the equipment it serves.
6. Environmental Sustainability: Some recent advancements focus on producing rod end bearings in an environmentally sustainable manner. Manufacturers are exploring eco-friendly materials and production processes to reduce the environmental impact of bearing manufacturing.
7. IoT Integration: In industrial applications, the integration of Internet of Things (IoT) technology allows for real-time monitoring and predictive maintenance of rod end bearings. Sensors and data analytics help detect early signs of wear or damage, optimizing maintenance schedules and minimizing downtime.
These recent advancements in rod end bearing technology have collectively improved the reliability, durability, and performance of these components in various mechanical systems. As technology continues to evolve, rod end bearings are expected to play an even more critical role in enhancing the efficiency and longevity of machinery and equipment.
Maintenance Practices to Extend the Life of Rod End Bearings
Rod end bearings play a crucial role in various mechanical systems, and proper maintenance can significantly extend their lifespan. Here are some specific maintenance practices to consider:
1. Lubrication: Regularly lubricate the rod end bearing according to the manufacturer’s recommendations. Proper lubrication reduces friction, minimizes wear, and prevents corrosion. Use high-quality lubricants suitable for the application’s conditions.
2. Inspection: Perform routine inspections to check for signs of wear, damage, or contamination. Look for play, unusual noises, visible damage, and any other indicators mentioned earlier. Timely detection of issues allows for prompt corrective action.
3. Cleanliness: Keep the surrounding environment clean to prevent contamination. Dust, dirt, and debris can lead to premature wear and damage. Regularly clean the bearing housing and sealing mechanisms.
4. Environmental Protection: In applications exposed to harsh environments, consider protective measures such as seals and shields to prevent contamination and reduce exposure to moisture, dust, or chemicals.
5. Alignment: Ensure proper alignment of rod end bearings within the system. Misalignment can increase stress on the bearing and lead to premature failure. Correct any alignment issues promptly.
6. Avoid Overloading: Be mindful of load capacities and avoid subjecting rod end bearings to excessive loads. Overloading can lead to rapid wear and shortened bearing life. Use bearings with appropriate load ratings for the application.
7. Regular Maintenance Schedule: Establish a maintenance schedule that includes lubrication, inspections, and cleaning. The frequency of maintenance depends on factors like operating conditions, load, and the manufacturer’s recommendations.
8. Replacement of Seals: If your rod end bearings have seals or shields, periodically check their condition. Replace damaged or worn-out seals to maintain effective contamination protection.
9. Storage: When storing spare rod end bearings, ensure they are kept in a clean, dry, and temperature-controlled environment. Use appropriate storage methods to prevent corrosion or damage before installation.
10. Expert Advice: If you’re unsure about maintenance or replacement procedures, consult with the bearing manufacturer or a qualified technician for guidance and assistance.
By following these maintenance practices, you can extend the life of rod end bearings, reduce downtime, and ensure the reliable performance of the systems in which they are used.
Rod End Bearings and Their Applications
Rod end bearings, also known as heim joints or rose joints, are mechanical components that consist of a spherical plain bearing with an inner ring and an outer ring. They are widely used in various mechanical applications due to their versatility and ability to provide articulation and movement in different directions. Here are some common applications of rod end bearings:
- Linkages: Rod end bearings are often used in linkages and control systems to transmit motion or force. They provide a connection point between two components, allowing for angular misalignment and smooth movement.
- Automotive Suspension: In automotive applications, rod end bearings are used in suspension systems to connect control arms, sway bars, and other components. They accommodate both rotational and pivoting movement.
- Aerospace: Rod end bearings play a crucial role in aircraft control systems, such as ailerons, flaps, and rudders. They ensure precise and responsive control of the aircraft’s movable surfaces.
- Construction Equipment: Heavy machinery, like cranes and excavators, utilizes rod end bearings in their control systems. These bearings provide flexibility and robustness in handling heavy loads and dynamic forces.
- Industrial Machinery: Various industrial machines, including conveyor systems, manufacturing equipment, and robotic arms, use rod end bearings to enable movement and articulation in mechanical linkages.
- Marine Applications: On boats and ships, rod end bearings are employed in steering and control systems. They withstand the harsh marine environment and provide reliable performance.
- Motion Control Systems: In applications like 3D printers, CNC machines, and robotic arms, rod end bearings are used to create flexible and precise motion control mechanisms.
- Hydraulic Cylinders: Rod end bearings are used in hydraulic cylinders to connect the piston rod to the external components. They allow for both linear motion and misalignment.
- Off-Road Vehicles: In off-road vehicles such as ATVs and dirt bikes, rod end bearings are used in suspension systems to absorb shocks and provide articulation over rough terrain.
Rod end bearings are valued for their ability to handle both static and dynamic loads, accommodate misalignment, and offer long-lasting performance in a wide range of applications.
editor by CX 2024-03-04
China OEM High Quality Rod End Bearing High Speed with Long Life Rod End Bearing Self-Aligning Plain Bearing bearing air
Product Description
Product Description
Product Parameters
Product application
FAQ
Q: Where to find Other bearings ?
Discover the Homepage—–> Products
Q: HOW TO CHOOSE A BEARING?
To properly choose a ball bearing, the important thing is to take into account several parameters:
1. Its application
Bearings are everywhere and therefore their applications are varied:
- – Agriculture
Do you prefer that we remind you ?
Immediate and free call/email back
2nd step: the outside diameter of the bearing
- A / Put your bearing on the grid as shown in the diagram.
- B / Mark the outline of the outer ring. For more convenience, use a pencil with a fine point.
- C / For ease of reading, do not hesitate to draw lines to the axes and then take the measurement.
3rd step: the thickness of the bearing
- A / In the same way as for the outer diameter and the bore, place your bearing on the edge on the grid as shown in the diagram.
- B / Draw the outer contour.
- C / For ease of reading, do not hesitate to draw lines to the axes and then take the measurement.
Conclusion :
You now have 3 measuring elements that will allow you to identify your bearing: the inside diameter (or bore), the outside diameter, and the thickness.
You can postpone these measurements in our bearing search tool on our website
You search, we find !
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Rolling Element: Single Row Structure: Rod End Material: Bearing Steel and Stainless Steel Load Direction: Thrust Spherical Plain Bearing Add Lubricant: Non Self-lubricating Outer Structure: Normal Samples: US$ 1/Piece
1 Piece(Min.Order)|
Request SampleCustomization: Available|
Customized Request
Contribution of Rod End Bearings to Complex Motion in Industrial Machinery
Rod end bearings play a significant role in ensuring the proper functioning of industrial machinery with complex motion. Here’s how they contribute:
1. Articulation and Pivoting:
Industrial machinery often requires components that can pivot and articulate in multiple directions. Rod end bearings provide a flexible connection point, allowing for a wide range of motion. They are commonly used in applications like robotic arms, conveyor systems, and material handling equipment, where precise movement and adaptability are essential.
2. Load Transmission:
Industrial machinery frequently deals with heavy loads and dynamic forces. Rod end bearings efficiently transmit these loads from moving components to stationary structures. Whether it’s the linear movement of a press or the tilting motion of a heavy-duty crane, rod end bearings enable the smooth transfer of forces, reducing wear and tear on the machinery.
3. Misalignment Compensation:
Machinery parts can become misaligned due to manufacturing tolerances, wear, or other factors. Rod end bearings excel at compensating for misalignments, ensuring that moving parts remain connected and operational. This capability is crucial in applications with variable alignment requirements, such as industrial automation systems and assembly line equipment.
4. Precision and Control:
Many industrial processes demand precision and control over motion. Rod end bearings help achieve this by providing a reliable connection point that can be adjusted and fine-tuned. This precision is essential in applications like CNC machinery, where the accuracy of tool movement directly impacts the quality of the final product.
5. Corrosion Resistance:
Industrial machinery operates in diverse environments, some of which may expose components to moisture and corrosive substances. Rod end bearings are available in various materials, including stainless steel, which offers excellent corrosion resistance. This ensures the bearings’ longevity and reliability, even in challenging conditions.
Overall, rod end bearings contribute to the efficient and reliable operation of industrial machinery with complex motion requirements. Their ability to accommodate articulation, handle heavy loads, compensate for misalignment, provide precision, and resist corrosion makes them invaluable components in various industrial applications.
Maintenance Practices to Extend the Life of Rod End Bearings
Rod end bearings play a crucial role in various mechanical systems, and proper maintenance can significantly extend their lifespan. Here are some specific maintenance practices to consider:
1. Lubrication: Regularly lubricate the rod end bearing according to the manufacturer’s recommendations. Proper lubrication reduces friction, minimizes wear, and prevents corrosion. Use high-quality lubricants suitable for the application’s conditions.
2. Inspection: Perform routine inspections to check for signs of wear, damage, or contamination. Look for play, unusual noises, visible damage, and any other indicators mentioned earlier. Timely detection of issues allows for prompt corrective action.
3. Cleanliness: Keep the surrounding environment clean to prevent contamination. Dust, dirt, and debris can lead to premature wear and damage. Regularly clean the bearing housing and sealing mechanisms.
4. Environmental Protection: In applications exposed to harsh environments, consider protective measures such as seals and shields to prevent contamination and reduce exposure to moisture, dust, or chemicals.
5. Alignment: Ensure proper alignment of rod end bearings within the system. Misalignment can increase stress on the bearing and lead to premature failure. Correct any alignment issues promptly.
6. Avoid Overloading: Be mindful of load capacities and avoid subjecting rod end bearings to excessive loads. Overloading can lead to rapid wear and shortened bearing life. Use bearings with appropriate load ratings for the application.
7. Regular Maintenance Schedule: Establish a maintenance schedule that includes lubrication, inspections, and cleaning. The frequency of maintenance depends on factors like operating conditions, load, and the manufacturer’s recommendations.
8. Replacement of Seals: If your rod end bearings have seals or shields, periodically check their condition. Replace damaged or worn-out seals to maintain effective contamination protection.
9. Storage: When storing spare rod end bearings, ensure they are kept in a clean, dry, and temperature-controlled environment. Use appropriate storage methods to prevent corrosion or damage before installation.
10. Expert Advice: If you’re unsure about maintenance or replacement procedures, consult with the bearing manufacturer or a qualified technician for guidance and assistance.
By following these maintenance practices, you can extend the life of rod end bearings, reduce downtime, and ensure the reliable performance of the systems in which they are used.
Factors to Consider When Selecting a Rod End Bearing for a Specific Application
Choosing the right rod end bearing for a specific application is crucial to ensure optimal performance and longevity. Several factors should be taken into account during the selection process:
1. Load Capacity: Consider the magnitude and type of loads the bearing will need to support. Determine whether it will experience radial, axial, or a combination of loads. Select a rod end bearing with the appropriate load capacity rating to handle these loads.
2. Misalignment: Evaluate the degree of angular misalignment that may occur in the application. Some rod end bearings are designed to compensate for misalignment better than others. Choose a bearing that can accommodate the expected misalignment without compromising performance.
3. Environment: Take into account the operating environment. Consider factors like temperature, humidity, chemical exposure, and the presence of contaminants. Select a rod end bearing with suitable materials and protective features to withstand these conditions.
4. Lubrication: Proper lubrication is essential for the longevity and smooth operation of rod end bearings. Determine the lubrication method and frequency required for the application. Some rod end bearings come with built-in lubrication provisions or self-lubricating materials.
5. Thread Type and Size: The threaded shank of the rod end bearing should match the components it connects to. Consider the thread size and type (e.g., right-hand or left-hand threads) to ensure compatibility with your application.
6. Corrosion Resistance: If the application is in a corrosive environment, select a rod end bearing with corrosion-resistant materials or coatings. This is especially important in marine, chemical, or industrial settings.
7. Size and Weight Constraints: Ensure that the chosen rod end bearing fits within the space and weight limitations of the application. Measure the available space and consider weight restrictions when making your selection.
8. Operating Speed: Take into account the rotational or oscillatory speed of the bearing. Some rod end bearings are designed for high-speed applications, while others are better suited for low-speed or static applications.
9. Regulatory Compliance: In some industries, specific standards or regulations may apply to components like rod end bearings. Ensure that the selected bearing complies with any relevant industry standards or requirements.
10. Budget Constraints: While quality is essential, consider your budget constraints. Different rod end bearings come with varying price points. Choose a bearing that provides the necessary performance without exceeding your budget.
By carefully considering these factors, you can select the most suitable rod end bearing for your specific application, ensuring reliable and efficient operation.
editor by CX 2024-03-03
China OEM Phs8 Phs10 Phs12 Phs18 Self Lubricating Female Right Hand Male and Female Thread Rod End Bearing carrier bearing
Product Description
Product Description
Rod End Bearing Details:
A joint bearing, also known as a heim joint (N. America) or rose joint (U.K. and elsewhere), is a mechanical articulating joint. Such joints are used on the ends of control rods, steering links, tie rods, or anywhere a precision articulating joint is required. A ball swivel with an opening through which a bolt or other attaching hardware may pass is pressed into a circular casing with a threaded shaft attached. The threaded portion may be either male or female.
Articulated bearings are generally used for low-speed swing movements (ie angular movements). Since the sliding surface is spherical, tilting movements (ie self-aligning movements) can also be performed within a certain angle range, and the support shaft and the shaft shell hole are not concentric When the degree is large, it can still work normally.
Rod End Bearing mainly bear radial load, but also can withstand a certain amount of axial load which has little friction, high limiting speed, many type of size and forms. It’s suitable for precision instruments, low noise motors, automobiles, motorcycles and general machinery, the machinery industry, the most common kind of bearing.
The Rod End is a spherical slide bearing incorporating a spherical inner ring with precision and hardness equivalent to that of steel ball bearings. It provides very smooth rotating and oscillating motion without play.
Material:
Rod end of steel and zinc coated, with male or female thread, spherical surface with bronze liner, inner ring of carbon chromium steel, spherical surface with chromium plating, can be lubricated via a nipple or a hole in the rod end. It has characteristics of large load capability, easy mounting and dismounting and mechanism simplification.
SI..TK |
SA..TK |
SI..ES |
SA..ES |
PHS |
POS |
PHSB |
POSB |
SI5T/K |
SA5T/K |
SI5E |
SA5E |
PHS5 |
POS5 |
PHSB3 |
POSB3 |
SI6T/K |
SA6T/K |
SI6E |
SA6E |
PHS6 |
POS6 |
PHSB4 |
POSB4 |
SI8T/K |
SA8T/K |
SI8E |
SA8E |
PHS8 |
POS8 |
PHSB5 |
POSB5 |
SI10T/K |
SA10T/K |
SI10E |
SA10E |
PHS10 |
POS10 |
PHSB6 |
POSB6 |
SI12T/K |
SA12T/K |
SI12E |
SA12E |
PHS12 |
POS12 |
PHSB7 |
POSB7 |
SI14T/K |
SA14T/K |
SI15ES |
SA15ES |
PHS14 |
POS14 |
PHSB8 |
POSB8 |
SI16T/K |
SA16T/K |
SI17ES |
SA17ES |
PHS16 |
POS16 |
PHSB10 |
POSB10 |
SI18T/K |
SA18T/K |
SI20ES |
SA20ES |
PHS18 |
POS18 |
PHSB12 |
POSB12 |
SI20T/K |
SA20T/K |
SI25ES |
SA25ES |
PHS20 |
POS20 |
PHSB16 |
POSB16 |
SI22T/K |
SA22T/K |
SI30ES |
SA30ES |
PHS22 |
POS22 |
|
|
SI25T/K |
SA25T/K |
SI35ES |
SA35ES |
PHS25 |
POS25 |
|
|
SI28T/K |
SA28T/K |
SI40ES |
SA40ES |
PHS28 |
POS28 |
|
|
SI30T/K |
SA30T/K |
SI45ES |
SA45ES |
PHS30 |
POS30 |
|
|
SI35T/K |
SA35T/K |
SI50ES |
SA50ES |
|
|
|
|
SI40T/K |
SA40T/K |
SI60ES |
SA60ES |
|
|
|
|
SI50T/K |
SA50T/K |
SI70ES |
SA70ES |
|
|
|
|
|
|
SI80ES |
SA80ES |
|
|
|
|
NHS |
NOS |
SQ..RS |
SQZ..RS |
GE..ES |
GEG..ES |
GE..UK(2RS) |
PB |
NHS3 |
NOS3 |
SQ5RS |
SQZ5RS |
GE4E |
GEG4E |
GE4UK |
PB5 |
NHS4 |
NOS4 |
SQ6RS |
SQZ6RS |
GE5E |
GEG5E |
GE5UK |
PB6 |
NHS5 |
NOS5 |
SQ8RS |
SQZ8RS |
GE6E |
GEG6E |
GE6UK |
PB8 |
NHS6 |
NOS6 |
SQ10RS |
SQZ10RS |
GE8E |
GEG8E |
GE8UK |
PB10 |
NHS8 |
NOS8 |
SQ12RS |
SQZ12RS |
GE10ES |
GEG10ES |
GE10UK |
PB12 |
NHS10 |
NOS10 |
SQ14RS |
SQZ14RS |
GE12ES |
GEG12ES |
GE12UK |
PB14 |
NHS12 |
NOS12 |
SQ16RS |
SQZ16RS |
GE15ES |
GEG15ES |
GE15UK(2RS) |
PB16 |
NHS14 |
NOS14 |
SQ18RS |
SQZ18RS |
GE17ES |
GEG17ES |
GE17UK(2RS) |
PB18 |
NHS16 |
NOS16 |
SQ20RS |
SQZ20RS |
GE20ES |
GEG20ES |
GE20UK(2RS) |
PB20 |
NHS18 |
NOS18 |
SQ22RS |
SQZ22RS |
GE25ES |
GEG25ES |
GE25UK(2RS) |
PB22 |
NHS20 |
NOS20 |
|
|
GE30ES |
GEG30ES |
GE30UK(2RS) |
PB25 |
|
|
|
|
GE35ES |
GEG35ES |
GE35UK-2RS |
PB28 |
|
|
|
|
GE40ES |
GEG40ES |
GE40UK-2RS |
PB30 |
|
|
|
|
GE45ES |
GEG45ES |
GE45UK-2RS |
|
|
|
|
|
GE50ES |
GEG50ES |
GE50UK-2RS |
|
|
|
|
|
GE60ES |
GEG60ES |
GE60UK-2RS |
|
|
|
|
|
GE70ES |
GEG70ES |
GE70UK-2RS |
|
|
|
|
|
GE80ES |
GEG80ES |
GE80UK-2RS |
|
|
|
|
|
GE90ES |
GEG90ES |
GE90UK-2RS |
|
|
|
|
|
GE100ES |
GEG100ES |
GE100UK-2RS |
Kindly pls contact service , if you have any problem, thank you.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Rolling Element: | Single Row |
---|---|
Structure: | Rod End |
Material: | Carbon Steel Zinc Coated |
Customization: |
Available
| Customized Request |
---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: |
|
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Selecting Size and Thread Type for Rod End Bearings
When choosing the appropriate size and thread type for a rod end bearing, several considerations are important:
1. Load Requirements: Determine the expected loads the rod end bearing will need to support. Choose a size and material that can handle these loads without deformation or premature wear.
2. Thread Direction: Consider whether you need left-hand or right-hand threads. This depends on the specific application and the direction in which the rod end bearing will be subject to forces or adjustments.
3. Thread Size and Pitch: Select the thread size and pitch that match the mating components or the mounting point. Ensure compatibility to avoid threading issues during installation.
4. Environmental Conditions: Consider the operating environment. If the rod end bearing will be exposed to moisture, chemicals, or extreme temperatures, choose a material and thread type that can withstand these conditions without corrosion or degradation.
5. Lubrication: Evaluate the lubrication method. Some rod end bearings have built-in lubrication features, while others require external lubrication. Ensure that the selected bearing and thread type align with your lubrication approach.
6. Misalignment Requirements: If the application involves misalignment, select a rod end bearing with appropriate articulation capabilities, which may require specific size and thread choices to allow for the necessary movement.
7. Compatibility: Ensure that the rod end bearing’s size and thread type are compatible with the connecting components, such as linkages, control arms, or push/pull rods.
8. Adjustability: In applications where adjustability is required, consider rod end bearings with male and female threads to allow for fine-tuning and alignment.
9. Regulations and Standards: Check if there are industry or safety regulations that dictate specific size or thread requirements for your application.
10. Maintenance: Consider ease of maintenance. Some rod end bearings have features that facilitate inspection and lubrication, which can be essential for extending their lifespan.
11. Cost and Availability: Finally, factor in the cost and availability of the chosen rod end bearing size and thread type. Ensure it fits within your budget and can be readily sourced when needed.
By carefully evaluating these considerations, you can select the most suitable rod end bearing size and thread type for your specific application, ensuring optimal performance and longevity.
Contribution of Rod End Bearings to Smooth Movement in Automotive Control Systems
Rod end bearings play a crucial role in ensuring the smooth movement of control systems in various automotive applications. Here’s how they contribute:
1. Steering Systems:
Rod end bearings are used in steering linkages and tie rod ends. They provide the necessary articulation and pivoting to allow the front wheels to turn smoothly, enabling precise steering control. The low friction and high load-bearing capacity of rod end bearings contribute to responsive and accurate steering in both manual and power steering systems.
2. Suspension Systems:
In suspension systems, rod end bearings are used in components like control arms and stabilizer links. They allow for controlled movement of the suspension, ensuring that the vehicle’s wheels maintain optimal contact with the road surface. This contributes to a smoother and more comfortable ride, improved handling, and better traction, especially when driving over uneven or bumpy terrain.
3. Throttle and Accelerator Linkages:
Rod end bearings are employed in throttle and accelerator linkages, where they assist in transmitting pedal inputs to the engine’s throttle body. The smooth articulation provided by rod end bearings ensures that drivers can easily modulate engine power, contributing to smooth acceleration and deceleration.
4. Gear Shift Linkages:
In manual transmissions, rod end bearings are used in gear shift linkages. They enable precise and smooth gear changes by allowing for the controlled movement of the shift lever. This ensures that gears engage smoothly, reducing drivetrain shock and vibration.
5. Convertible Roof Mechanisms:
In convertible cars, rod end bearings are used in the mechanisms that operate the folding and unfolding of the convertible roof. The smooth articulation of rod end bearings contributes to the seamless transition between open and closed roof positions, enhancing the overall driving experience.
Overall, rod end bearings are integral components in automotive control systems, ensuring the smooth and precise operation of various critical functions, including steering, suspension, throttle control, gear shifting, and convertible roof movement.
Design Principles and Functions of Rod End Bearings
Rod end bearings, also known as heim joints or rose joints, are essential components in various mechanical applications, where articulation and precise control of movement are required. These bearings are designed with specific principles and functions in mind:
Design Principles:
Rod end bearings consist of a spherical plain bearing, also known as a spherical plain bushing, within a housing. The design principles are as follows:
- Spherical Plain Bearing: The heart of a rod end bearing is a spherical plain bearing. This bearing allows the inner ring to tilt and rotate in multiple directions. It consists of an inner and outer ring with a sliding layer of material in between, often made from self-lubricating materials.
- Housing: The spherical plain bearing is housed within a protective casing, typically made of metal or other durable materials. The housing provides structural support and retains the bearing components.
- Threaded Shank: The outer part of the housing is often shaped as a threaded shank, allowing for easy attachment to various mechanical components, such as linkages or control arms.
- Lubrication Fittings: Many rod end bearings have provisions for lubrication fittings to ensure smooth articulation and reduce friction.
Functions:
Rod end bearings serve several crucial functions in mechanical systems:
- Articulation: Rod end bearings provide articulation, enabling components to pivot, swivel, and move in multiple directions. This function is vital in applications requiring flexibility and control over movement.
- Angular Misalignment Compensation: They can compensate for both static and dynamic angular misalignment. This is particularly useful in situations where components may not align perfectly due to varying factors like vibration or assembly tolerances.
- Load Transmission: Rod end bearings can transmit static and dynamic loads, making them suitable for applications involving force or load transfer. They are used in machinery and equipment where precise control of loads is essential.
- Precision Movement: These bearings provide precise control and movement, making them suitable for applications where accurate positioning of mechanical components is critical. This includes industries like aerospace and robotics.
- Corrosion Resistance: Many rod end bearings are designed with corrosion-resistant materials or coatings, making them suitable for use in harsh environments, such as marine and industrial settings.
- Durability: Rod end bearings are engineered for durability, allowing them to withstand challenging conditions and heavy-duty use. This ensures their reliability and longevity in demanding applications.
- Versatility: Rod end bearings are versatile components used across various industries, including automotive, aerospace, industrial machinery, and marine applications. Their adaptability and reliability make them valuable to engineers and designers.
These design principles and functions of rod end bearings make them indispensable in a wide range of mechanical systems where articulation, load-bearing capacity, and precise control are required.
editor by CX 2024-02-26
China OEM 1200 &1300 Self-Aligning /rod end/Diesel generator sets/CNC Linear Guides/ Railway/Industrial Equipment/Slewing Ring/Diesel generator sets /Engine Bearing bearing block
Product Description
Product Description
Comprehensive product range:
– Bearings
– Oil seals, Transmission belt
– Chain and Sprocket
– Hub assembly & Wheel bearings
– Coupling, castings
– Linear motion
Self-Aligning Ball Bearing | ||||||||||||||
1200 – 1300 Series | ||||||||||||||
Bearing No. | dxDxB (mm) | Weight(kg) | Bearing No. | dxDxB (mm) | Weight(kg) | |||||||||
1200 | 10 | 30 | 9 | 0.034 | 1300 | 10 | 35 | 11 | 0.059 | |||||
1201 | 12 | 32 | 10 | 0.040 | 1301 | 12 | 37 | 12 | 0.067 | |||||
1202 | 15 | 35 | 11 | 0.049 | 1302 | 15 | 42 | 13 | 0.094 | |||||
1203 | 1203 K | 17 | 40 | 12 | 0.073 | 1303 | 1303 K | 17 | 47 | 14 | 0.130 | |||
1204 | 1204 K | 20 | 47 | 14 | 0.120 | 1304 | 1304 K | 20 | 52 | 15 | 0.160 | |||
1205 | 1205 K | 25 | 52 | 15 | 0.140 | 1305 | 1305 K | 25 | 52 | 17 | 0.260 | |||
1206 | 1206 K | 30 | 62 | 16 | 0.220 | 1306 | 1306 K | 30 | 72 | 19 | 0.390 | |||
1207 | 1207 K | 35 | 72 | 17 | 0.320 | 1307 | 1307 K | 35 | 80 | 21 | 0.510 | |||
1208 | 1208 K | 40 | 80 | 18 | 0.420 | 1308 | 1308 K | 40 | 90 | 23 | 0.710 | |||
1209 | 1209 K | 45 | 85 | 19 | 0.470 | 1309 | 1309 K | 45 | 100 | 25 | 0.960 | |||
1210 | 1210 K | 50 | 90 | 20 | 0.530 | 1310 | 1310 K | 50 | 110 | 27 | 1.200 | |||
1211 | 1211 K | 55 | 100 | 21 | 0.710 | 1311 | 1311 K | 55 | 120 | 29 | 1.600 | |||
1212 | 1212 K | 60 | 110 | 22 | 0.900 | 1312 | 1312 K | 60 | 130 | 31 | 1.950 | |||
1213 | 1213 K | 65 | 120 | 23 | 1.150 | 1313 | 1313 K | 65 | 140 | 33 | 2.450 | |||
1214 | 1214 K | 70 | 125 | 24 | 1.250 | 1314 | 1314 K | 70 | 150 | 35 | 3.000 | |||
1215 | 1215 K | 75 | 130 | 25 | 1.350 | 1315 | 1315 K | 75 | 160 | 37 | 3.550 | |||
1216 | 1216 K | 80 | 140 | 26 | 1.650 | 1316 | 1316 K | 80 | 170 | 39 | 4.200 | |||
1217 | 1217 K | 85 | 150 | 28 | 2.050 | 1317 | 1317 K | 85 | 180 | 40 | 5.000 | |||
1218 | 1218 K | 90 | 160 | 30 | 2.500 | 1318 | 1318 K | 90 | 190 | 43 | 5.800 | |||
1219 | 1219 K | 95 | 170 | 32 | 3.100 | 1319 | 1319 K | 95 | 200 | 45 | 6.700 | |||
1220 | 1220 K | 100 | 180 | 34 | 3.700 | 1320 | 1320 K | 100 | 215 | 47 | 8.460 | |||
1221 | 1221 K | 105 | 190 | 36 | 4.350 | 1322 | 1322 K | 110 | 220 | 50 | 12.00 | |||
1222 | 1222 K | 110 | 200 | 38 | 5.150 | |||||||||
1224 | 1224 K | 120 | 215 | 42 | 6.750 | |||||||||
1226 | 1226 K | 130 | 230 | 46 | 8.300 | |||||||||
Roller Bearings
01
Cylindrical Roller Bearings | Spherical Roller Bearings |
Taper Roller Bearings | Needle Roller Bearings |
02
Applications:
Agriculture | Construction |
Cars and light trucks | Industrial transmission |
Metals | Mining & mineral processing |
Industrial fans | Marine |
Material handling | etc. |
After Sales Service
1. Focus on a variety of industries
2. Provide maintenance solutions
3. Optimize customer inventory and reduce cost
Vision
Continue to innovate through resource integration and business diversification to maintain uniqueness in the market
Mission
Provide comprehensive quality products and thoughtful customer service
Our Values
Behavior-based, service oriented, focused on results, and committed to continuous improvement
Our Advantages
1. Advanced Automatic Lines
2. Comprehensive Range
3. Premium Quality
4. Sustainability
Factory
To be a leader in providing the best valuable (Reasonable cost, Reliable quality) supply of precision rollers.
Providing this value, will help our customers remain competitive in the global marketplace.
Please see detailed introduction about our manufacturing process and measuring process.
Quality Warranty
Granville as a manufacturer of high quality products, guarantees compliance with the highest standards relative to the use of the best steel quality in the production process, the highest standards in the design of contact surfaces, as well as the most efficient packing and lubrication of parts. From material coming, quality control through all processes. Except interal test, goods to third party inspection if required. After the center of inspection and experiment being founded, effective methods of inspecting all kinds of raw materials are mastered and then the reliability of bearings is ensured. One of our main objectives is the continued improvement in the quality of our products and processes, in pursuit of which we obtained ISO certification 9001:2008 and TS16949.
Advantage Manufacturing Processes and Quality Control:
01Heat Treatment
02 Centerless Grinding Machine 11200 (most advanced)
03 Automatic Production Lines for Raceway
04 Automatic Production Lines for Raceway
05 Ultrasonic Cleaning of Rings
06 Automatic Assembly
07 Ultrasonic Cleaning of Bearings
08 Automatic Greasing, Seals Pressing
09Measurement of Bearing Vibration (Acceleration)
10 Measurement of Bearing Vibration (Speed)
11 Laser Marking
12 Automatic Packing
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Structure: | Deep Ditch |
---|---|
Precision Rating: | P0/P6/P5/P4/P2 |
Bore Size: | 30mm-230mm |
Samples: |
US$ 0.2/Set
1 Set(Min.Order) | Order Sample Sample unit price depends on the specific model
|
---|
Customization: |
Available
| Customized Request |
---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: |
|
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Contribution of Rod End Bearings to Complex Motion in Industrial Machinery
Rod end bearings play a significant role in ensuring the proper functioning of industrial machinery with complex motion. Here’s how they contribute:
1. Articulation and Pivoting:
Industrial machinery often requires components that can pivot and articulate in multiple directions. Rod end bearings provide a flexible connection point, allowing for a wide range of motion. They are commonly used in applications like robotic arms, conveyor systems, and material handling equipment, where precise movement and adaptability are essential.
2. Load Transmission:
Industrial machinery frequently deals with heavy loads and dynamic forces. Rod end bearings efficiently transmit these loads from moving components to stationary structures. Whether it’s the linear movement of a press or the tilting motion of a heavy-duty crane, rod end bearings enable the smooth transfer of forces, reducing wear and tear on the machinery.
3. Misalignment Compensation:
Machinery parts can become misaligned due to manufacturing tolerances, wear, or other factors. Rod end bearings excel at compensating for misalignments, ensuring that moving parts remain connected and operational. This capability is crucial in applications with variable alignment requirements, such as industrial automation systems and assembly line equipment.
4. Precision and Control:
Many industrial processes demand precision and control over motion. Rod end bearings help achieve this by providing a reliable connection point that can be adjusted and fine-tuned. This precision is essential in applications like CNC machinery, where the accuracy of tool movement directly impacts the quality of the final product.
5. Corrosion Resistance:
Industrial machinery operates in diverse environments, some of which may expose components to moisture and corrosive substances. Rod end bearings are available in various materials, including stainless steel, which offers excellent corrosion resistance. This ensures the bearings’ longevity and reliability, even in challenging conditions.
Overall, rod end bearings contribute to the efficient and reliable operation of industrial machinery with complex motion requirements. Their ability to accommodate articulation, handle heavy loads, compensate for misalignment, provide precision, and resist corrosion makes them invaluable components in various industrial applications.
Contribution of Rod End Bearings to Smooth Movement in Automotive Control Systems
Rod end bearings play a crucial role in ensuring the smooth movement of control systems in various automotive applications. Here’s how they contribute:
1. Steering Systems:
Rod end bearings are used in steering linkages and tie rod ends. They provide the necessary articulation and pivoting to allow the front wheels to turn smoothly, enabling precise steering control. The low friction and high load-bearing capacity of rod end bearings contribute to responsive and accurate steering in both manual and power steering systems.
2. Suspension Systems:
In suspension systems, rod end bearings are used in components like control arms and stabilizer links. They allow for controlled movement of the suspension, ensuring that the vehicle’s wheels maintain optimal contact with the road surface. This contributes to a smoother and more comfortable ride, improved handling, and better traction, especially when driving over uneven or bumpy terrain.
3. Throttle and Accelerator Linkages:
Rod end bearings are employed in throttle and accelerator linkages, where they assist in transmitting pedal inputs to the engine’s throttle body. The smooth articulation provided by rod end bearings ensures that drivers can easily modulate engine power, contributing to smooth acceleration and deceleration.
4. Gear Shift Linkages:
In manual transmissions, rod end bearings are used in gear shift linkages. They enable precise and smooth gear changes by allowing for the controlled movement of the shift lever. This ensures that gears engage smoothly, reducing drivetrain shock and vibration.
5. Convertible Roof Mechanisms:
In convertible cars, rod end bearings are used in the mechanisms that operate the folding and unfolding of the convertible roof. The smooth articulation of rod end bearings contributes to the seamless transition between open and closed roof positions, enhancing the overall driving experience.
Overall, rod end bearings are integral components in automotive control systems, ensuring the smooth and precise operation of various critical functions, including steering, suspension, throttle control, gear shifting, and convertible roof movement.
Scenarios Requiring Articulation and Pivoting with Rod End Bearings
Rod end bearings are essential components in scenarios where articulation and pivoting are crucial. Here are some examples:
- Vehicle Suspension: Rod end bearings in a vehicle’s suspension system allow articulation of the wheels, ensuring a smooth and controlled ride, especially on uneven terrain.
- Aircraft Control Surfaces: In aviation, rod end bearings enable the pivoting of control surfaces like ailerons, elevators, and rudders, providing precise control over an aircraft’s movements.
- Robotic Arms: Rod end bearings facilitate the articulation and pivoting of robotic arms in manufacturing, assembly, and medical robotics, allowing for precise and flexible movement.
- Construction Equipment: Heavy machinery such as excavators and cranes rely on rod end bearings for articulation in booms, buckets, and other moving parts for effective operation.
- Marine Steering Systems: Rod end bearings play a vital role in boat steering systems, allowing articulation of the outboard motor or inboard-outboard drive unit.
- Agricultural Machinery: Tractors and combines use rod end bearings to articulate and pivot components in the steering and hydraulic systems for farming operations.
- Rail and Transportation: In rail systems, rod end bearings help with the articulation of train doors, ensuring safe and efficient passenger entry and exit.
- Conveyor Systems: In material handling, rod end bearings assist in the pivoting and articulation of conveyor belt rollers and other components for the smooth movement of goods.
- Sports Equipment: Fitness machines like elliptical trainers use rod end bearings to facilitate articulation in pedal arms, allowing users to exercise effectively.
These examples demonstrate the versatility and importance of rod end bearings in various industries where articulation and pivoting are essential for optimal performance and control.
editor by CX 2024-02-20
China OEM Radial Spherical Plain Bearing POS Phs Ball Joint Rod End Bearing China manufacturer
Product Description
Materials | Series | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bearing steel |
Do you prefer that we remind you ? Immediate and free call/email back 2nd step: the outside diameter of the bearing
3rd step: the thickness of the bearing
Conclusion :You now have 3 measuring elements that will allow you to identify your bearing: the inside diameter (or bore), the outside diameter, and the thickness. You can postpone these measurements in our bearing search tool on our website
You search, we find ! /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Improving Aircraft Functionality with Rod End BearingsRod end bearings play a critical role in enhancing the functionality and safety of various aircraft components, including control surfaces and landing gear. Here’s how: Aircraft Control Surfaces: Rod end bearings are commonly used in aircraft control systems to connect control surfaces, such as ailerons, elevators, and rudders, to control cables or rods. These bearings provide several key benefits:
Landing Gear: Rod end bearings are also utilized in landing gear systems, which are critical for safe takeoffs, landings, and ground operations. Their contributions include:
Overall, rod end bearings in aircraft applications contribute to the precise control, safety, and structural reliability necessary for aviation. Their ability to handle articulation, misalignment, and challenging operating conditions makes them indispensable components in the aerospace industry. Contribution of Rod End Bearings to Smooth Movement in Automotive Control SystemsRod end bearings play a crucial role in ensuring the smooth movement of control systems in various automotive applications. Here’s how they contribute: 1. Steering Systems: Rod end bearings are used in steering linkages and tie rod ends. They provide the necessary articulation and pivoting to allow the front wheels to turn smoothly, enabling precise steering control. The low friction and high load-bearing capacity of rod end bearings contribute to responsive and accurate steering in both manual and power steering systems. 2. Suspension Systems: In suspension systems, rod end bearings are used in components like control arms and stabilizer links. They allow for controlled movement of the suspension, ensuring that the vehicle’s wheels maintain optimal contact with the road surface. This contributes to a smoother and more comfortable ride, improved handling, and better traction, especially when driving over uneven or bumpy terrain. 3. Throttle and Accelerator Linkages: Rod end bearings are employed in throttle and accelerator linkages, where they assist in transmitting pedal inputs to the engine’s throttle body. The smooth articulation provided by rod end bearings ensures that drivers can easily modulate engine power, contributing to smooth acceleration and deceleration. 4. Gear Shift Linkages: In manual transmissions, rod end bearings are used in gear shift linkages. They enable precise and smooth gear changes by allowing for the controlled movement of the shift lever. This ensures that gears engage smoothly, reducing drivetrain shock and vibration. 5. Convertible Roof Mechanisms: In convertible cars, rod end bearings are used in the mechanisms that operate the folding and unfolding of the convertible roof. The smooth articulation of rod end bearings contributes to the seamless transition between open and closed roof positions, enhancing the overall driving experience. Overall, rod end bearings are integral components in automotive control systems, ensuring the smooth and precise operation of various critical functions, including steering, suspension, throttle control, gear shifting, and convertible roof movement. Applications and Industries Using Rod End BearingsRod end bearings find application across various industries and serve multiple purposes due to their versatility and design. Common applications and sectors where rod end bearings are used include: 1. Automotive: Rod end bearings are utilized in vehicle suspension systems, steering linkages, and throttle linkages, contributing to precise control and smooth movement. 2. Aerospace: They play a crucial role in aircraft control systems, ensuring reliable and precise movement in critical flight control components. 3. Construction and Heavy Machinery: These bearings are used in heavy equipment like cranes, excavators, and loaders for precise positioning and movement in various parts of the machinery. 4. Manufacturing: In manufacturing machinery, rod end bearings are employed for automation and motion control applications, ensuring accurate and smooth movement in industrial processes. 5. Agricultural Equipment: Farm machinery, such as tractors and combines, use rod end bearings in steering systems, hydraulics, and other mechanical components. 6. Robotics: Rod end bearings are critical in robotic arms and automation systems, facilitating precise movement and control in manufacturing, medical, and other industries. 7. Marine and Offshore: They are used in marine applications, contributing to reliable control and movement in boat steering systems and offshore equipment. 8. Medical Equipment: In medical devices and equipment, rod end bearings ensure precise and smooth movement, making them essential in applications like surgical robots and diagnostic instruments. 9. Racing and Motorsports: Rod end bearings are used in high-performance vehicles for suspension and steering systems, where precise control is paramount. 10. Material Handling: Conveyor systems and material handling equipment benefit from rod end bearings, ensuring efficient movement and transport of goods. 11. Renewable Energy: They play a role in solar tracking systems and wind turbine applications, helping to adjust panel angles and rotor blades for optimal energy capture. 12. Rail and Transportation: In rail systems and transportation equipment, rod end bearings are employed in various components, including doors, brakes, and suspension systems. 13. Sports and Fitness Equipment: In gym equipment and sports machinery, they provide smooth and reliable motion in treadmills, exercise bikes, and more. Rod end bearings are valued for their ability to provide reliable and precise movement in a wide range of applications, contributing to the efficiency and safety of various industries.
China OEM Pillow Ball Rod End Bearing Threaded Rod End Female Male Thread Bearing Heim Joint Bearing Phs16 double row ball bearingProduct Description
Product Description
SI6T/K M6 Female Thread Rod End Joint Bearing Spherical Oscillating Bearing
Product Parameters Detailed Photos
Company Profile
Our Advantages FAQ DO NOT worry about PRICE, we are manufacturer.
DO NOT worry about QUALITY, we have 16 years experience.
DO NOT worry about AFTER-SALES, we are 24 hours online. Q1:Who we are? We are the factory based in ZHangZhoug,China,start from 2007 sell to all over the.world.the factory area is around 45000 square meters.we have 900 employees.
Q2: Do you have a catalogue? Can you send me the catalogue to have a check of all your products? A: Yes , We have product catalogue.Please contact us on line or send an Email to sending the catalogue. Q3: I can’t find the product on your catalogue, can you make this product for me? Q4 : Can you make customized products and customized packing? Q5: Can you provide samples ? Are the samples free ? Any requirements or question,Welcome to “Send” us an e-mail Now! Recommend product
Contribution of Rod End Bearings to Complex Motion in Industrial MachineryRod end bearings play a significant role in ensuring the proper functioning of industrial machinery with complex motion. Here’s how they contribute: 1. Articulation and Pivoting: Industrial machinery often requires components that can pivot and articulate in multiple directions. Rod end bearings provide a flexible connection point, allowing for a wide range of motion. They are commonly used in applications like robotic arms, conveyor systems, and material handling equipment, where precise movement and adaptability are essential. 2. Load Transmission: Industrial machinery frequently deals with heavy loads and dynamic forces. Rod end bearings efficiently transmit these loads from moving components to stationary structures. Whether it’s the linear movement of a press or the tilting motion of a heavy-duty crane, rod end bearings enable the smooth transfer of forces, reducing wear and tear on the machinery. 3. Misalignment Compensation: Machinery parts can become misaligned due to manufacturing tolerances, wear, or other factors. Rod end bearings excel at compensating for misalignments, ensuring that moving parts remain connected and operational. This capability is crucial in applications with variable alignment requirements, such as industrial automation systems and assembly line equipment. 4. Precision and Control: Many industrial processes demand precision and control over motion. Rod end bearings help achieve this by providing a reliable connection point that can be adjusted and fine-tuned. This precision is essential in applications like CNC machinery, where the accuracy of tool movement directly impacts the quality of the final product. 5. Corrosion Resistance: Industrial machinery operates in diverse environments, some of which may expose components to moisture and corrosive substances. Rod end bearings are available in various materials, including stainless steel, which offers excellent corrosion resistance. This ensures the bearings’ longevity and reliability, even in challenging conditions. Overall, rod end bearings contribute to the efficient and reliable operation of industrial machinery with complex motion requirements. Their ability to accommodate articulation, handle heavy loads, compensate for misalignment, provide precision, and resist corrosion makes them invaluable components in various industrial applications. Enhancing Off-Road Vehicle Suspension with Rod End BearingsRod end bearings play a crucial role in enhancing the performance of suspension systems in off-road vehicles. Here’s how they contribute: 1. Articulation and Flexibility: Off-road vehicles encounter challenging terrains with varying obstacles. Rod end bearings provide articulation, allowing the suspension components to move independently. This flexibility ensures that each wheel can adapt to the terrain’s irregularities, improving traction and stability. 2. Load Distribution: In off-road conditions, vehicles often experience uneven loads due to rough terrain. Rod end bearings help distribute these loads across the suspension components, preventing excessive stress on any single part and reducing the risk of damage or failure. 3. Durability and Strength: Off-road environments are harsh, and suspension systems endure significant stress. Rod end bearings are designed for high-stress applications, providing the necessary strength and durability to withstand rugged conditions and maintain peak performance. 4. Precision Handling: Off-road vehicles require precise handling to navigate challenging terrain effectively. Rod end bearings maintain proper alignment, ensuring that the suspension geometry is consistent. This precision handling is vital for maintaining control over the vehicle, even on rough paths. 5. Reducing Vibration and Impact: Off-roading often involves encountering vibrations and impacts from uneven surfaces. Rod end bearings act as damping elements, reducing the transmission of these vibrations to the vehicle’s chassis. This helps improve ride comfort and minimizes the risk of structural damage. 6. Adjustable Suspension: Some off-road vehicles feature adjustable suspension systems that allow users to adapt to different terrains. Rod end bearings are integral to these systems, providing the flexibility needed to make real-time adjustments for optimal performance. 7. Maintenance and Serviceability: Off-road vehicles require regular maintenance, and the serviceability of suspension components is crucial. Rod end bearings are designed for ease of maintenance, making it simpler to inspect, lubricate, and replace them when necessary. 8. Versatility: Off-road vehicle suspension systems come in various designs. Rod end bearings are versatile components that can be integrated into different suspension types, including independent front suspensions, solid axle suspensions, and multi-link suspensions. In summary, rod end bearings significantly enhance the performance of suspension systems in off-road vehicles by providing articulation, load distribution, durability, precision handling, vibration reduction, adjustability, and ease of maintenance. These features collectively ensure that off-road vehicles can tackle challenging terrains with confidence and reliability. Advantages of Rod End BearingsRod end bearings offer several advantages compared to other bearing types, making them suitable for specific applications that require articulation, flexibility, and precise control. Here are some key advantages of rod end bearings:
Overall, rod end bearings excel in applications that require a combination of articulation, load-bearing capacity, and precision. Their ability to handle misalignment and provide reliable performance in demanding environments makes them a preferred choice in various industries.
China OEM Spherical Plain Bearing Joint Bearing Knuckle Bearing Rod End bearing driverProduct Description
Why Choose HECTO? Spherical Plain Bearings of GE…E, GE…ES, GE…ES-2RS series
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
Differences Between Male and Female Threaded Rod End BearingsMale and female threaded rod end bearings differ in their design and applications: Male Threaded Rod End Bearings: – Male rod end bearings have external threads on the shank or body of the bearing. – They are typically used in applications where the bearing is mounted to a stationary component, and the threaded shank extends to connect with a mating part (e.g., a linkage or control arm). – Male rod end bearings allow for easy adjustment or fine-tuning of the connection. – These bearings are suitable for applications requiring controlled movement or positioning, where the bearing’s external threads facilitate precise adjustments. Female Threaded Rod End Bearings: – Female rod end bearings have an internal (female) threaded bore inside the housing. – They are used when a bolt, stud, or shaft with external threads needs to be connected to the bearing’s housing. – Female rod end bearings are often employed in applications where the bearing needs to rotate around a fixed shaft or bolt, providing articulation and misalignment capabilities. – These bearings allow for the attachment of a variety of external components, making them versatile for different applications. The choice between male and female threaded rod end bearings depends on the specific requirements of the application, including whether the bearing needs to be attached to a stationary part or connected to an external threaded component and the level of adjustability and articulation needed. Impact of Different Materials on Rod End Bearing PerformanceRod end bearings can be manufactured from various materials, and the choice of material significantly affects their performance. Two common materials used are stainless steel and carbon steel: Stainless Steel Rod End Bearings: 1. Corrosion Resistance: Stainless steel rod end bearings offer excellent resistance to corrosion, making them suitable for applications in wet or corrosive environments, including marine and outdoor settings. 2. Hygienic Applications: They are ideal for applications in food processing, pharmaceuticals, and medical equipment due to their non-reactive and hygienic properties. 3. Temperature Resistance: Stainless steel can withstand a wide range of temperatures, making these bearings suitable for applications exposed to extreme heat or cold. Carbon Steel Rod End Bearings: 1. Strength and Durability: Carbon steel rod end bearings are known for their high strength and durability, making them suitable for heavy-duty industrial applications such as construction equipment and agricultural machinery. 2. Cost-Effectiveness: They are often more cost-effective than stainless steel bearings, which makes them a preferred choice when the enhanced corrosion resistance of stainless steel is not required. 3. Machinability: Carbon steel is easier to machine and modify, making it a good choice for customized or specialized bearing configurations. Ultimately, the choice between stainless steel and carbon steel rod end bearings depends on the specific application’s environmental conditions, load requirements, and cost considerations. Stainless steel is preferred for its corrosion resistance, while carbon steel excels in applications demanding strength and durability. Rod End Bearings and Their ApplicationsRod end bearings, also known as heim joints or rose joints, are mechanical components that consist of a spherical plain bearing with an inner ring and an outer ring. They are widely used in various mechanical applications due to their versatility and ability to provide articulation and movement in different directions. Here are some common applications of rod end bearings:
Rod end bearings are valued for their ability to handle both static and dynamic loads, accommodate misalignment, and offer long-lasting performance in a wide range of applications.
|